Milford Microsystems
Pocket Power PP100 enables owners to switch between a remap and standard map via
the car's diagnostic port at the touch of a button.
The PP100 solution gives you an alternative option for ECU remapping on your
vehicle.
|
|
PP100 addresses this by using the latest serial port upload techniques and packaging them up into a neat pocket sized module to give you control over when you want the power and when you want to run as standard.
|
|
The process itself is very simple:- 2. Select the map you wish to load from the dongle and upload, remove and enjoy! A few minutes later, your ECU will have an improved map that smoothes annoying flat spots and gives you increased power and torque throughout the rev range with much increased driveability.
|
![]() |
Should you wish to revert your car back to the manufacturers standard settings, for example, when taking it to a dealer for a service, then all you need is to plug the PP100 back in again and follow the steps to reload the standard map.
You can change between your remap and standard maps whenever you wish.
Performance tuning in a click!
Please Contact Us to arrange your remap
PP100 is available for the following VAG vehicles:- (prices are plus vat)
|
VAG Petrol Models |
Engine range | Typical Power / Torque increase* | Mail Order | Inc. Data Logging** |
|
|
3.2 | up to 15bhp / 15lbs | £499 | £549 |
|
|
1.8T (various*) | up to 55bhp / 70lbs | £499 | £549 |
|
|
S4(V8) | up to 20bhp / 15lbs | £919 | £969 |
|
|
RS4 | up to 40bhp / 80lbs | £1069 | £1119 |
|
|
||||
|
VAG Diesel Models |
||||
|
|
1.4PDi | up to 25bhp / 30lbs | £499 | £549 |
|
|
1.9PDi 100 | up to 30bhp / 35lbs | £499 | £549 |
|
|
1.9PDi 130-150 | up to 30bhp / 50lbs | £499 | £549 |
|
|
Multitronics 15% less power, *performance
figures are approximate and increases are dependant on engine/ecu variant you
have
**requires visiting one of our locations.
The figures above are typical hp/torque increases.